Hardware Manuals


Other - The Next Beat SX1  

CONTROLS


FRONT-REAR PANEL CONNECTIONS


U USB
Connect the USB-C port to a USB port of your computer using the provided USB-C cable
M MASTER OUTPUT
Connect your amplified speakers using RCA cables
H PHONES OUTPUT
Connect your Headphones using a 1/4" or 3/4" adaptor.
V PHONES VOL
Adjust the output of the Headphones output (Hardware Operation)




KEY

ACTION

SHIFT (SECONDARY) ACTION

S1 SHIFT1
Primary SHIFT button. Press this button down to access secondary actions (labeled in green color) as described in the SHIFT ACTION column
S2 SHIFT2
Press this button down to access secondary actions (labeled in blue color) as described in the SHIFT ACTION column
1 PLAY
Play-pause loaded track
Play-stutter loaded track
2 CUE
Set a temporary Cue point at current position when track is paused or preview while pressed if Cue point is assigned. Return to this Cue point when track is playing
Jump to the beginning of the track
3 JOG
Touch-sensitive jogwheel for scratching (when Vinyl mode is enabled) or pitch-bending (when Vinyl mode is disabled).
Vinyl mode can be enabled/disabled from VirtualDJ GUI
Fast-searching through loaded track
4 LOOP-
Half the size of the Loop in beats
SHIFT1 : Trigger Hotcue 3
SHIFT2 : Delete Hotcue 3
5 LOOP
Enable/disable a seamless Loop of the selected size in beats
SHIFT1 : Trigger Hotcue 2
SHIFT2 : Delete Hotcue 2
6 LOOP+
Double the size of the Loop in beats
SHIFT1 : Trigger Hotcue 1
SHIFT2 : Delete Hotcue 1
7 TEMPO-
Decrease Deck's Tempo by -0.1 BPM
SHIFT1 : Enable/Disable Master Tempo
SHIFT2 : Decrease Deck's Tempo by -0.5 BPM
8 TEMPO+
Increase Deck's Tempo by +0.1 BPM
SHIFT1 : nothing
SHIFT2 : Increase Deck's Tempo by +0.5 BPM
9 SYNC
Match the BPM of the other Deck and smoothly catch up the phase of the opposite Deck to synchronize this Deck to the opposite one.
SHIFT1 : Smoothly reset Pitch and reset Deck's BPM to the original value
10 FILTER
Adjust the selected Color FX (Filter by default). When at the middle position, no Color FX is applied.
SHIFT1 : Adjust the 1st Parameter of the selected Effect
11 FX ON
Enable/disable the selected Effect
SHIFT1 : Select the previous available Effect
SHIFT2 : Select the next available Effect
12 EQUALIZER
Adjust the Low and High frequencies (or Stems) of the Left/Right deck
13 VOLUME
Adjust the Output volume of the Left/Right Deck.
14 BROWSE
Scroll through the Folders/Tracks
Push to toggle focus between Folders and Files Browser lists
SHIFT2 : Toggle focus between Files and Sideview Browser lists
15 MASTER PFL
When enabled, the signal of the Master Output will be sent to the Headphones channel
SHIFT1 : Sets focus to the Folders list of Browser. If focus is on Folders, expand/collapse sub-folders.
SHIFT2 : Cycles through the available views of Sideview (Automix, Sidelist, Sampler etc)
16 LOAD
Loads the selected Track to the Left/Right Deck.
Fast-double-press to clone the Track of the opposite Deck.
SHIFT1 : Unloads the Track from the Left/Right Deck
17 MASTER GAIN
Adjust the Master Output volume
18 VINYL
Enable/disable Vinyl mode for the Jogwheel
SHIFT1 : Trigger Sample 1 (Left side) and Sample 2 (Right side) of the loaded Sampler Bank
SHIFT2 : Trigger Sample 3 (Left side) and Sample 4 (Right side) of the loaded Sampler Bank
19 PFL
Send audio signal of Left/Right Deck to the headphones channel
SHIFT1 : Trigger Sample 5 (Left side) and Sample 6 (Right side) of the loaded Sampler Bank
SHIFT2 : Trigger Sample 7 (Left side) and Sample 8 (Right side) of the loaded Sampler Bank
20 CROSSFADER
Blends audio between the Left and Right decks





For further Technical features and specifications, visit

The Next Beat SX1
Product's Page





Hardware Integration Department
2023 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.