Quick Sign In:  

Forum: VirtualDJ Technical Support

Topic: Export - Page: 1
So I can see my drive under the "Volumes" section but when I go to Export the files that drive isnt an option.

What am I doing wrong??

Using a 2020 M1 Macbook Pro.

Thanks
 

Posted 7 days ago @ 2:04 pm
AdionPRO InfinityCTOMember since 2006
Is the drive fat32 formatted?
 

Posted 7 days ago @ 2:25 pm
Yes sir, looking back under export it only shows 2 of my drives when I have 5 total connected.

I just got to work and didn’t bring my laptop so I can’t screenshot anything till tonight.
 

Posted 7 days ago @ 2:30 pm
So you can see the “T7” drive is there along with a bunch of others



But under the export tab only 2 drives show up??



What am I missing or doing wrong here??
 

Posted 7 days ago @ 11:36 pm
Anyone??
 

Posted 7 days ago @ 12:43 am
In case it wasn't clear:
It needs to be FAT32, not exFAT or anything else..
Can you post a screenshot of drives utility that shows the T7 drive ?
 

Posted 6 days ago @ 9:48 am


Its not my drive........
 

Posted 6 days ago @ 12:39 pm
djdadPRO InfinityDevelopment ManagerMember since 2005
I read ... Available : zero bytes, weird.
and what does it show when u expand Sharing & Permissions ?
 

Posted 6 days ago @ 12:50 pm
Something's wrong with that drive.
First of all it was not formatted properly.
While there are tools that will format FAT32 drives to more than 32GB, those drives are not guaranteed to work under all cases. Like here.. The drive is formatted as a 500GB FAT32 partition. And MAC says 0 bytes free.
Because most likely it cannot process the drive properly.

Since this is not your drive, I cannot give you an answer that will work.
But if it was your drive, I would suggest to format it as exFAT, or NTFS (if you have Paragon installed on your MAC) or APFS.
Of course the drive would still wouldn't work for CDJ Export, but that's another story.
Also I don't know about CDJ-3000 but I doubt older equipment like CDJ-2000NXS2 would be able to read it.
I know a lot of people have trouble with 64GB USB sticks allready and Pioneer officially supports up to 32GB (the limit of FAT32)

PS: HFS+ also works for CDJ drives
 

Posted 6 days ago @ 12:51 pm
Ok I’m gonna take the drive to work and use my windows machine there to format it to FAT32 and then try it again.

It’s a Samsung T7 SSD drive .

I have to use FAT32 because that’s all I can use on Denon players
 

Posted 6 days ago @ 1:02 pm
djdad wrote :
I read ... Available : zero bytes, weird.
and what does it show when u expand Sharing & Permissions ?


It is expanded, what you see is all that there is.
 

Posted 6 days ago @ 1:03 pm
Perhaps it's not necessary to format it.
Check if Windows can read it first.
If it works on Windows, then it's just that it's not supported (at this capacity) on MAC OS.
 

Posted 6 days ago @ 1:10 pm
It shows up on windows but I cant see an option to format to FAT32, its only showing me EXFAT which you said wont work.

Its Windows 11, any advice on how to do this??

Thanks

EDIT

Nevermind, I'm using the command prompt to format it
 

Posted 6 days ago @ 1:41 pm
How was the drive formated as FAT32 in the first place ?
If I remember correctly, DiscGenius (a free Windows application) should be able to format it to FAT32 with size bigger than 32GB, but I have to format something to FAT32 (that's not a USB stick / SD card) probably more than a decade..
 

Posted 6 days ago @ 1:46 pm
I used my Mac's disk utility to format it.

 

Posted 6 days ago @ 1:49 pm
Ok why won't this work?? I can move playlists from Engine DJ over to the drive but VDJ refuses to let me use it!!





its formatted the right way!

What is going on here?? My WD SSD 500gb works just fine so Im not understanding the issue here??
 

Posted 6 days ago @ 5:31 pm
Heres the 2 that are showing up and 1 is FAT32 while the other is EXFAT



All my drives are either EXFAT or FAT32 yet VDJ only sees what it wants to see.

What is going on??
 

Posted 6 days ago @ 5:49 pm
Devs??
 

Posted 6 days ago @ 12:10 am
AdionPRO InfinityCTOMember since 2006
You can try right-click on the CDJ folder and select 'show all drives'
 

Posted 5 days ago @ 8:32 am
I did that and it still doesnt show.

Anyone else using a Samsung T7??
 

Posted 5 days ago @ 2:48 pm
67%