awe320
for some reason i cannot set the paddles to control the correct deck,
paddle 1 is controlling deck 3, paddle 2 is controlling deck 1. all other controls are working fine.
[device_side 'left'] is for paddle 2 and [device_side '1'] is not working.
Where is the problem?
Thanks
paddle 1 is controlling deck 3, paddle 2 is controlling deck 1. all other controls are working fine.
[device_side 'left'] is for paddle 2 and [device_side '1'] is not working.
Where is the problem?
Thanks
Posted 2 days ago @ 6:51 am
DJ VinylTouch
What is the option mxerOrder set to?
By default, I think it's set to 3124 (describing channel control from left to right) , so if you are describing the paddles and what they control from left to right (and unless I'm misunderstanding the problem), then it sounds like correct behavior (paddle 1 will control deck 3 and paddle 2 will control deck 1).
You can change mixerOrder to be 1234 to have that order of deck control from left to right on the mixer.
By default, I think it's set to 3124 (describing channel control from left to right) , so if you are describing the paddles and what they control from left to right (and unless I'm misunderstanding the problem), then it sounds like correct behavior (paddle 1 will control deck 3 and paddle 2 will control deck 1).
You can change mixerOrder to be 1234 to have that order of deck control from left to right on the mixer.
Posted 2 days ago @ 12:34 pm
awe320
If i will change the order all other controls will be in the wrong place (faders, eq, gain, filter, meter, etc).
What other options are there beside 'left' and 'right' for 4 channel controller?
What other options are there beside 'left' and 'right' for 4 channel controller?
Posted 19 hours ago
awe320
ok fixed it! here is the script for FX_PADDLE:
action_deck 1 ? deck 3 effect_active 6 while_pressed : action_deck 2 ? deck 2 effect_active 6 while_pressed : action_deck 3 ? deck 1 effect_active 6 while_pressed : action_deck 4 ? deck 4 effect_active 6 while_pressed
action_deck 1 ? deck 3 effect_active 6 while_pressed : action_deck 2 ? deck 2 effect_active 6 while_pressed : action_deck 3 ? deck 1 effect_active 6 while_pressed : action_deck 4 ? deck 4 effect_active 6 while_pressed
Posted 18 hours ago
DJ VinylTouch
So I'm pretty sure you broke the mapping for things like latching (up vs down), etc, so please put it back to what it was.
Now that I think of what you described (and looking at what you wrote in the script), it's most likely you toggled deck inversion from the controller on the left side (the leftdeck was swapped between 3 and 1). After restoring the factory mapping, press the Deck 3 button on the left deck and see if that resolves your issue (try the left side paddles again).
Now that I think of what you described (and looking at what you wrote in the script), it's most likely you toggled deck inversion from the controller on the left side (the leftdeck was swapped between 3 and 1). After restoring the factory mapping, press the Deck 3 button on the left deck and see if that resolves your issue (try the left side paddles again).
Posted 11 hours ago
awe320
no its not
Posted 9 hours ago