IIDEEJAYII
When do I do I need the back ticks on parameter? in this case level is defined by VDJ as value of a volume fader.
Is it advised to use `level` in
since the code below also works without the back ticks
Is it advised to use `level` in
param_greater 50% `level`
since the code below also works without the back ticks
param_greater 50% level
Posted Sat 26 Dec 20 @ 9:14 am
Nicotux
Important note: this is only right in a script and real sliders, this won't work correctly in a custom slider
specially using encoders (controller) or scroll(touch screen) or mouse roll(mouse)
In a custom slider relative values are passed and parameters are two different things and a modification to parameter make slider position wrong
customslider value have to be kept in a SLIDER SPECIFIC variable to be the right one
(in one word, custom slider are not really sliders anymore)
set v & param_cast absolute & set v `get_var v & param_bigger 0.0 ? param_bigger 1.0 ? constant 1.0 : get_var v : constant 0.0` & param_add 0 `get_var v` & ...
"set v" sets the absolute value of the slider (apply relative ones not taking care of slider bounds) (can be <0.0 and > 1.0, most of the case +/-0.6250 +/-0.03125 depending on speed)
"param_absolute" convert relative value to absolute giving the ability to set the correct position to slider but is currently is totally inaccurate (i.e.: +/-0.03125)
"set v `...`" sets the value in real range a slider can display (0.0 .. 1.0)
"param_add 0 `get_var v`" is a hack to overwrite the bad value converted from relative with the correct absolute value to display
&... from there the action can be done using parameter which is now right absolute value, in correct range
in example, the value 1 between 50%..75% and 0 otherwhise (using cast rounding)
set myvar `level & param_bigger 0.75 ? constant 0 : param_cast int`
the backquote are not needed with "param_*" verbs when actions are one word only
in most of other verbs they are needed or not allowed, only trial and error can help
specially using encoders (controller) or scroll(touch screen) or mouse roll(mouse)
In a custom slider relative values are passed and parameters are two different things and a modification to parameter make slider position wrong
customslider value have to be kept in a SLIDER SPECIFIC variable to be the right one
(in one word, custom slider are not really sliders anymore)
set v & param_cast absolute & set v `get_var v & param_bigger 0.0 ? param_bigger 1.0 ? constant 1.0 : get_var v : constant 0.0` & param_add 0 `get_var v` & ...
"set v" sets the absolute value of the slider (apply relative ones not taking care of slider bounds) (can be <0.0 and > 1.0, most of the case +/-0.6250 +/-0.03125 depending on speed)
"param_absolute" convert relative value to absolute giving the ability to set the correct position to slider but is currently is totally inaccurate (i.e.: +/-0.03125)
"set v `...`" sets the value in real range a slider can display (0.0 .. 1.0)
"param_add 0 `get_var v`" is a hack to overwrite the bad value converted from relative with the correct absolute value to display
&... from there the action can be done using parameter which is now right absolute value, in correct range
in example, the value 1 between 50%..75% and 0 otherwhise (using cast rounding)
set myvar `level & param_bigger 0.75 ? constant 0 : param_cast int`
the backquote are not needed with "param_*" verbs when actions are one word only
in most of other verbs they are needed or not allowed, only trial and error can help
Posted Sat 26 Dec 20 @ 9:25 am
locoDog
param_greater is expecting 2 things, that could be an actions or values, or a mix
since it is expecting an action it can work with no spaced actions without ` ` so, level, get_level etc will be fine.
however, if there's a space in the action, lets say
effect_slider 'echo' 1
the space will mess things up so you would need to encapsulate ` ` , I believe encapsulate works with " " & ' ' too
param_equal, is slightly different, it is expecting either action, value or a string so, wrapping with " " or ' ' is reserved for strings.
Most of the time if doing a comparison on an action, wrapping the action in ` ` can't hurt there is one exception I'll try remember what it was.
*edit, I was remembering the wrong thing
since it is expecting an action it can work with no spaced actions without ` ` so, level, get_level etc will be fine.
however, if there's a space in the action, lets say
effect_slider 'echo' 1
the space will mess things up so you would need to encapsulate ` ` , I believe encapsulate works with " " & ' ' too
param_equal, is slightly different, it is expecting either action, value or a string so, wrapping with " " or ' ' is reserved for strings.
Most of the time if doing a comparison on an action, wrapping the action in ` ` can't hurt
*edit, I was remembering the wrong thing
Posted Sat 26 Dec 20 @ 9:40 am
Nicotux
i try again as post does not appear
`level & param_bigger 0.75 ? get_constant 0 : param_cast int`
backquote only not needed with "param_*' when action is one word only
most other verbs are needing backquotes or ignore them
as locodog said there are "exception" . trial & error only can help
All the above tests and comparisons are only working with scripts and physical sliders but not with custom_sliders
(custom sliders are not real sliders anymore for a while)
so that user slider have to be scripted in a way to make it work correctly
they need a specific variable (each) to handle value, specially using relative scroll, slide & move
(encoders, touchscreen, mouse roll)
set v[INDEX] & param_cast absolute & set v[INDEX] `get_var v[INDEX] & param_bigger 0.0 ? param_bigger 1.0 ? constant 1.0 : get_var v[INDEX] : constant 0.0` & param_add 0 `get_var v[INDEX]` & ...
set v : save the wrong absolute value (not in slider range)
param_cast absolute : convert param for future use
set v `..` : fix correct value for the slider
param_add 0.0 ... : hack to be able to overwrite parameter with correct absolute value and update slider display accordingly
& ... : now parameter is in range [0.0..1.0] and correct absolute value is passed to the script
`level & param_bigger 0.75 ? get_constant 0 : param_cast int`
backquote only not needed with "param_*' when action is one word only
most other verbs are needing backquotes or ignore them
as locodog said there are "exception" . trial & error only can help
All the above tests and comparisons are only working with scripts and physical sliders but not with custom_sliders
(custom sliders are not real sliders anymore for a while)
so that user slider have to be scripted in a way to make it work correctly
they need a specific variable (each) to handle value, specially using relative scroll, slide & move
(encoders, touchscreen, mouse roll)
set v[INDEX] & param_cast absolute & set v[INDEX] `get_var v[INDEX] & param_bigger 0.0 ? param_bigger 1.0 ? constant 1.0 : get_var v[INDEX] : constant 0.0` & param_add 0 `get_var v[INDEX]` & ...
set v : save the wrong absolute value (not in slider range)
param_cast absolute : convert param for future use
set v `..` : fix correct value for the slider
param_add 0.0 ... : hack to be able to overwrite parameter with correct absolute value and update slider display accordingly
& ... : now parameter is in range [0.0..1.0] and correct absolute value is passed to the script
Posted Sat 26 Dec 20 @ 9:49 am