djtyme209
example if I go to load a song on deck 1, the same song will load physically on Deck 2 ? if I load a song on Deck 2 it will physically load on Deck 1. They load on opposite sides. 1st i thought it was my denons sc3900's. then i thought it was the newest version of VDJ that i just installed. (7.4.1) so i uninstalled it and installed (7.4) i still have the same problems ? so i dont even have the denons plugged it, restarted my laptop open up VDj and with the american audio 14mxr only connected. the songs still load on both decks at the same tyme & play on the wrong side ? please help as to i have a gig this saturday & i'm really stressing. Please see My Video link thanx. https://www.youtube.com/watch?v=Adfq1zoA1Qk
Posted Thu 21 Nov 13 @ 1:43 pm
djtyme209
and just so ya know i have two laptops one with windows 7 & windows 8 and it does it on both laptops ?
Posted Thu 21 Nov 13 @ 2:01 pm
super7877
What happens if you disconnect the mixer also?
Posted Thu 21 Nov 13 @ 6:55 pm
djtyme209
super7877 wrote :
What happens if you disconnect the mixer also?
??? why would i want to do that? then im stuck using the keyboard & mouse which defeats the purpose
Posted Fri 22 Nov 13 @ 3:45 am
djdad
So, while this happens, all you have in your USB ports connected is the AA MXR ? What is the Sound Setup you have in Config ? Can you post a screenshot ?
Try this...
Launch VDJ with a 4 decks skin. See if in Mappers tab ->Deck assignment, you get any options now. If you do, make sure its set to Left-Right.
Then choose your 2 deck skin back, and relaunch to see if the issue remains.
In case you connect the Denon DC units, make sure one of them is assigned as Deck 1 and the other as Deck 2.
The wrong side of Sound Output may be related to reverted Sound Setup ..E.g. if you are using External Mixer ..Maybe Deck 1 and Deck 2 need to be reverted in Sound Outputs option.
Try this...
Launch VDJ with a 4 decks skin. See if in Mappers tab ->Deck assignment, you get any options now. If you do, make sure its set to Left-Right.
Then choose your 2 deck skin back, and relaunch to see if the issue remains.
In case you connect the Denon DC units, make sure one of them is assigned as Deck 1 and the other as Deck 2.
The wrong side of Sound Output may be related to reverted Sound Setup ..E.g. if you are using External Mixer ..Maybe Deck 1 and Deck 2 need to be reverted in Sound Outputs option.
Posted Fri 22 Nov 13 @ 6:13 am
djtyme209
djdad wrote :
So, while this happens, all you have in your USB ports connected is the AA MXR ? What is the Sound Setup you have in Config ? Can you post a screenshot ?
Try this...
Launch VDJ with a 4 decks skin. See if in Mappers tab ->Deck assignment, you get any options now. If you do, make sure its set to Left-Right.
Then choose your 2 deck skin back, and relaunch to see if the issue remains.
In case you connect the Denon DC units, make sure one of them is assigned as Deck 1 and the other as Deck 2.
The wrong side of Sound Output may be related to reverted Sound Setup ..E.g. if you are using External Mixer ..Maybe Deck 1 and Deck 2 need to be reverted in Sound Outputs option.
Try this...
Launch VDJ with a 4 decks skin. See if in Mappers tab ->Deck assignment, you get any options now. If you do, make sure its set to Left-Right.
Then choose your 2 deck skin back, and relaunch to see if the issue remains.
In case you connect the Denon DC units, make sure one of them is assigned as Deck 1 and the other as Deck 2.
The wrong side of Sound Output may be related to reverted Sound Setup ..E.g. if you are using External Mixer ..Maybe Deck 1 and Deck 2 need to be reverted in Sound Outputs option.
1st i was testing with the denons & 14mxr. then disconnected the denons. so yes only 14mxr. i'll try the 4 deck skin in when i get back home. and yup the denons are assigned deck 1 / deck 2. sound set up is: inputs (none) / outputs (external mixer) deck 1: chan 1&2 / deck 2: chan 3&4. sound card ADJ Asio. to give ya a lil insight i (Had) the American Audio 10MXR, 2 denons sc3900's, VDJ. all set up working fine. but i sold the 10mxr and bought the 14mxr brand new cause i needed more aux/line inputs & needed the 2 mic option. so all i did was unhook the 10mxr & hooked up the 14mxr. i didnt change anything in VDJ setup ? so this is why i'm so puzzled?
Posted Fri 22 Nov 13 @ 11:17 am
djtyme209
well djdad i did the 4 deck skin thing and no there was no deck assignment option. but i did run across this video and in the video it shows when he loaded a song to deck A i seen it also load up on the other side at the same tyme ? so i wonder if this is normal for the 14mxr should i instal the mapper from this VDJ website or no because the 14mxr has native support already ? see video at 3:42 min = http://www.youtube.com/watch?v=HLVCeP84acM
Posted Fri 22 Nov 13 @ 12:37 pm
djdad
The MXR series are natively supported, so there should be no need to have any custom mappers installed. Actually in Devices and Mapper folders, make sure no MXR files exist, and repeat your tests.
If the issue still persists, there might be an issue with the default mappers. Since i dont currently have the unit, could u please do the following ?
- Close VirtualDJ and any other application that might use the AA MXR unit.
- Use Miditrace.. http://www.virtualdj.com/download/miditrace.exe
- Once the application is launched, select the unit from both right-top and right-bottom lists.
- Press SEND
- Press the left LOAD button.
- Press the right LOAD button
- While pressing SHIFT.. press the left LOAD button
- While pressing SHIFT.. press the right LOAD button
Copy all the data the tool will provide and paste them here.
Thanks
PS. While you re having the loading issue..(with VirtuaLDJ), is the SHIFT button lit or flashing ?
If the issue still persists, there might be an issue with the default mappers. Since i dont currently have the unit, could u please do the following ?
- Close VirtualDJ and any other application that might use the AA MXR unit.
- Use Miditrace.. http://www.virtualdj.com/download/miditrace.exe
- Once the application is launched, select the unit from both right-top and right-bottom lists.
- Press SEND
- Press the left LOAD button.
- Press the right LOAD button
- While pressing SHIFT.. press the left LOAD button
- While pressing SHIFT.. press the right LOAD button
Copy all the data the tool will provide and paste them here.
Thanks
PS. While you re having the loading issue..(with VirtuaLDJ), is the SHIFT button lit or flashing ?
Posted Fri 22 Nov 13 @ 3:10 pm
djtyme209
djdad wrote :
The MXR series are natively supported, so there should be no need to have any custom mappers installed. Actually in Devices and Mapper folders, make sure no MXR files exist, and repeat your tests.
If the issue still persists, there might be an issue with the default mappers. Since i dont currently have the unit, could u please do the following ?
- Close VirtualDJ and any other application that might use the AA MXR unit.
- Use Miditrace.. http://www.virtualdj.com/download/miditrace.exe
- Once the application is launched, select the unit from both right-top and right-bottom lists.
- Press SEND
- Press the left LOAD button.
- Press the right LOAD button
- While pressing SHIFT.. press the left LOAD button
- While pressing SHIFT.. press the right LOAD button
Copy all the data the tool will provide and paste them here.
Thanks
PS. While you re having the loading issue..(with VirtuaLDJ), is the SHIFT button lit or flashing ?
If the issue still persists, there might be an issue with the default mappers. Since i dont currently have the unit, could u please do the following ?
- Close VirtualDJ and any other application that might use the AA MXR unit.
- Use Miditrace.. http://www.virtualdj.com/download/miditrace.exe
- Once the application is launched, select the unit from both right-top and right-bottom lists.
- Press SEND
- Press the left LOAD button.
- Press the right LOAD button
- While pressing SHIFT.. press the left LOAD button
- While pressing SHIFT.. press the right LOAD button
Copy all the data the tool will provide and paste them here.
Thanks
PS. While you re having the loading issue..(with VirtuaLDJ), is the SHIFT button lit or flashing ?
here is the results
F0 7E 7F 06 02 00 01 70 03 00 02 00 08 04 00 00 F7
90 65 7F 00
80 65 40 00
81 65 40 00
90 66 7F 00
80 66 40 00
81 66 40 00
90 6D 7F 00
91 65 7F 00
81 65 40 00
80 65 40 00
80 6D 40 00
81 6D 40 00
90 6D 7F 00
91 66 7F 00
81 66 40 00
80 66 40 00
80 6D 40 00
81 6D 40 00
Posted Fri 22 Nov 13 @ 3:40 pm
djtyme209
and no the shift button is not flashing
Posted Fri 22 Nov 13 @ 3:40 pm
djtyme209
here is the midi table from the owners manual hope it helps:
MXR MIDI interface definition
NOTE: all MIDI messages use channel 1 or channel 2, Directions OUT and IN are relative to the Mixer
Control number is in decimal format
All rotary VRs start at the minimum in the leftmost position and increase to the maximum when turned clockwise
For all commands except LED, when in controller mode, add 2 to the channel number when Controller mode is on. Ex: Note on 90H (91H) becomes Note on 92H in controller mode
Description Control type MIDI Values Remarks Shift
MICROPHONE
MIC 1 ON/OFF Button / LED 76 00H = released, 7FH = pressed Note on 90H (91H)
MIC 1 GAIN Rotary VR NA
MIC 1 TREBLE Rotary VR 21 00H min to 7FH max Control change B0H (B1H)
MIC 1 MID Rotary VR 22 00H min to 7FH max Control change B0H (B1H)
MIC 1 BASS Rotary VR 23 00H min to 7FH max Control change B0H (B1H)
MIC 2 ON/OFF Button / LED 77 00H = released, 7FH = pressed Note on 90H (91H)
MIC 2 GAIN Rotary VR NA
MIC 2 TREBLE Rotary VR 25 00H min to 7FH max Control change B0H (B1H)
MIC 2 MID Rotary VR 26 00H min to 7FH max Control change B0H (B1H)
MIC 2 BASS Rotary VR 27 00H min to 7FH max Control change B0H (B1H)
TALKOVER Button / LED 78 00H = released, 7FH = pressed Note on 90H (91H)
MIXER
USB / ANALOG 1 Button 89 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 1 GAIN Rotary VR 0 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 TREBLE Rotary VR 1 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 MID Rotary VR 2 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 BASS Rotary VR 3 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 1 Button / LED 42 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 1 LINE Slide VR 4 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 2 Button 90 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 2 GAIN Rotary VR 5 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 TREBLE Rotary VR 6 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 MID Rotary VR 7 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 BASS Rotary VR 8 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 2 Button / LED 43 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 2 LINE Slide VR 9 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 3 Button 91 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 3 GAIN Rotary VR 10 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 TREBLE Rotary VR 11 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 MID Rotary VR 12 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 BASS Rotary VR 13 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 3 Button / LED 44 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 3 LINE Slide VR 14 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 4 Button 92 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 4 GAIN Rotary VR 15 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 TREBLE Rotary VR 16 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 MID Rotary VR 17 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 BASS Rotary VR 18 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 4 Button / LED 45 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 4 LINE Slide VR 19 00H min bottom to 7FH max top Control change B0H (B1H)
XF ASSIGN 1 Left Rotary Select 93 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 2 Left Rotary Select 94 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 3 Left Rotary Select 95 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 4 Left Rotary Select 96 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 1 Right Rotary Select 97 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 2 Right Rotary Select 98 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 3 Right Rotary Select 99 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 4 Right Rotary Select 100 00H = no assign, 7FH = assign Note on 90H (91H)
CROSSFADER Slide VR 31 00H min left to 7FH max right Control change B0H (B1H)
CROSSFADER CURVE Rotary VR 33 00H min to 7FH max Control change B0H (B1H)
MASTER Rotary VR 28 00H min to 7FH max Control change B0H (B1H)
BOOTH Rotary VR 30 00H min to 7FH max Control change B0H (B1H)
CUE MIX Rotary VR 34 00H min (cue/CH1) to 7FH max (master/CH2) Control change B0H (B1H)
CUE GAIN Rotary VR 35 00H min to 7FH max Control change B0H (B1H)
SPLIT CUE Button / LED 41 / 41 00H = released, 7FH = pressed Note on 90H (91H)
FILTER
LPF/HPF CH1 Rotary VR 37 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 1 PUSH Button / LED 22 / 22 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH1 Rotary Encoder 36 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 1 PUSH Button / LED 23 / 23 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH2 Rotary VR 39 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 2 PUSH Button / LED 24 / 24 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH2 Rotary Encoder 38 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 2 PUSH Button / LED 25 / 25 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH3 Rotary VR 41 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 3 PUSH Button / LED 61 / 61 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH3 Rotary Encoder 40 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 3 PUSH Button / LED 62 / 62 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH4 Rotary VR 43 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 4 PUSH Button / LED 63 / 63 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH4 Rotary Encoder 42 3FH=CCW, 41H = CW Control change B0H (B1H)
Left Buttons
CUE Left Button / LED 12 / 12 00H = released, 7FH = pressed Note on 90H (91H)
PLAY/PAUSE >|| Left Button / LED 13 /13 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 1 Left Button / LED 18 / 18 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 2 Left Button / LED 19 / 19 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 3 Left Button / LED 20 / 20 00H = released, 7FH = pressed Note on 90H (91H)
SYNC Left Button / LED 21 / 21 00H = released, 7FH = pressed Note on 90H (91H)
Center Buttons
LOAD Left Button / LED 101 / 101 00H = released, 7FH = pressed Note on 90H (91H)
LOAD Right Button / LED 102 / 102 00H = released, 7FH = pressed Note on 90H (91H)
LEFT navigate Button 103 00H = released, 7FH = pressed Note on 90H (91H)
RIGHT navigate Button 104 00H = released, 7FH = pressed Note on 90H (91H)
UP navigate Button 105 00H = released, 7FH = pressed Note on 90H (91H)
DOWN navigate Button 106 00H = released, 7FH = pressed Note on 90H (91H)
Center encoder Push Button 107 00H = released, 7FH = pressed Note on 90H (91H)
CENTER ENCODER Rotary Encoder 52 3FH=CCW, 41H = CW Control change B0H (B1H)
CONTROLLER MODE Button / LED 108 /110 00H = released, 7FH = pressed Note on 90H (91H)
Shift touch button / LED 109 / 111 00H = released, 7FH = pressed Note on 90H
Right Buttons
CUE Right Button / LED 46 / 46 00H = released, 7FH = pressed Note on 90H (91H)
PLAY/PAUSE >|| Right Button / LED 47 / 47 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 1 Right Button / LED 52 / 52 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 2 Right Button / LED 53 / 53 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 3 Right Button / LED 54 / 54 00H = released, 7FH = pressed Note on 90H (91H)
SYNC Right Button / LED 55 / 55 00H = released, 7FH = pressed Note on 90H (91H)
MXR MIDI interface definition
NOTE: all MIDI messages use channel 1 or channel 2, Directions OUT and IN are relative to the Mixer
Control number is in decimal format
All rotary VRs start at the minimum in the leftmost position and increase to the maximum when turned clockwise
For all commands except LED, when in controller mode, add 2 to the channel number when Controller mode is on. Ex: Note on 90H (91H) becomes Note on 92H in controller mode
Description Control type MIDI Values Remarks Shift
MICROPHONE
MIC 1 ON/OFF Button / LED 76 00H = released, 7FH = pressed Note on 90H (91H)
MIC 1 GAIN Rotary VR NA
MIC 1 TREBLE Rotary VR 21 00H min to 7FH max Control change B0H (B1H)
MIC 1 MID Rotary VR 22 00H min to 7FH max Control change B0H (B1H)
MIC 1 BASS Rotary VR 23 00H min to 7FH max Control change B0H (B1H)
MIC 2 ON/OFF Button / LED 77 00H = released, 7FH = pressed Note on 90H (91H)
MIC 2 GAIN Rotary VR NA
MIC 2 TREBLE Rotary VR 25 00H min to 7FH max Control change B0H (B1H)
MIC 2 MID Rotary VR 26 00H min to 7FH max Control change B0H (B1H)
MIC 2 BASS Rotary VR 27 00H min to 7FH max Control change B0H (B1H)
TALKOVER Button / LED 78 00H = released, 7FH = pressed Note on 90H (91H)
MIXER
USB / ANALOG 1 Button 89 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 1 GAIN Rotary VR 0 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 TREBLE Rotary VR 1 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 MID Rotary VR 2 00H min to 7FH max Control change B0H (B1H)
MIDILOG 1 BASS Rotary VR 3 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 1 Button / LED 42 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 1 LINE Slide VR 4 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 2 Button 90 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 2 GAIN Rotary VR 5 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 TREBLE Rotary VR 6 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 MID Rotary VR 7 00H min to 7FH max Control change B0H (B1H)
MIDILOG 2 BASS Rotary VR 8 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 2 Button / LED 43 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 2 LINE Slide VR 9 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 3 Button 91 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 3 GAIN Rotary VR 10 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 TREBLE Rotary VR 11 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 MID Rotary VR 12 00H min to 7FH max Control change B0H (B1H)
MIDILOG 3 BASS Rotary VR 13 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 3 Button / LED 44 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 3 LINE Slide VR 14 00H min bottom to 7FH max top Control change B0H (B1H)
USB / ANALOG 4 Button 92 00H = USB, 7FH = ANALOG Note on 90H (91H)
MIDILOG 4 GAIN Rotary VR 15 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 TREBLE Rotary VR 16 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 MID Rotary VR 17 00H min to 7FH max Control change B0H (B1H)
MIDILOG 4 BASS Rotary VR 18 00H min to 7FH max Control change B0H (B1H)
CUE MIDILOG 4 Button / LED 45 00H = released, 7FH = pressed Note on 90H (91H)
MIDILOG 4 LINE Slide VR 19 00H min bottom to 7FH max top Control change B0H (B1H)
XF ASSIGN 1 Left Rotary Select 93 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 2 Left Rotary Select 94 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 3 Left Rotary Select 95 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 4 Left Rotary Select 96 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 1 Right Rotary Select 97 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 2 Right Rotary Select 98 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 3 Right Rotary Select 99 00H = no assign, 7FH = assign Note on 90H (91H)
XF ASSIGN 4 Right Rotary Select 100 00H = no assign, 7FH = assign Note on 90H (91H)
CROSSFADER Slide VR 31 00H min left to 7FH max right Control change B0H (B1H)
CROSSFADER CURVE Rotary VR 33 00H min to 7FH max Control change B0H (B1H)
MASTER Rotary VR 28 00H min to 7FH max Control change B0H (B1H)
BOOTH Rotary VR 30 00H min to 7FH max Control change B0H (B1H)
CUE MIX Rotary VR 34 00H min (cue/CH1) to 7FH max (master/CH2) Control change B0H (B1H)
CUE GAIN Rotary VR 35 00H min to 7FH max Control change B0H (B1H)
SPLIT CUE Button / LED 41 / 41 00H = released, 7FH = pressed Note on 90H (91H)
FILTER
LPF/HPF CH1 Rotary VR 37 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 1 PUSH Button / LED 22 / 22 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH1 Rotary Encoder 36 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 1 PUSH Button / LED 23 / 23 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH2 Rotary VR 39 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 2 PUSH Button / LED 24 / 24 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH2 Rotary Encoder 38 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 2 PUSH Button / LED 25 / 25 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH3 Rotary VR 41 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 3 PUSH Button / LED 61 / 61 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH3 Rotary Encoder 40 3FH=CCW, 41H = CW Control change B0H (B1H)
BANDWIDTH MIDILOG 3 PUSH Button / LED 62 / 62 00H = released, 7FH = pressed Note on 90H (91H)
LPF/HPF CH4 Rotary VR 43 00H min to 7FH max Control change B0H (B1H)
LPF/HPF MIDILOG 4 PUSH Button / LED 63 / 63 00H = released, 7FH = pressed Note on 90H (91H)
BANDWIDTH CH4 Rotary Encoder 42 3FH=CCW, 41H = CW Control change B0H (B1H)
Left Buttons
CUE Left Button / LED 12 / 12 00H = released, 7FH = pressed Note on 90H (91H)
PLAY/PAUSE >|| Left Button / LED 13 /13 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 1 Left Button / LED 18 / 18 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 2 Left Button / LED 19 / 19 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 3 Left Button / LED 20 / 20 00H = released, 7FH = pressed Note on 90H (91H)
SYNC Left Button / LED 21 / 21 00H = released, 7FH = pressed Note on 90H (91H)
Center Buttons
LOAD Left Button / LED 101 / 101 00H = released, 7FH = pressed Note on 90H (91H)
LOAD Right Button / LED 102 / 102 00H = released, 7FH = pressed Note on 90H (91H)
LEFT navigate Button 103 00H = released, 7FH = pressed Note on 90H (91H)
RIGHT navigate Button 104 00H = released, 7FH = pressed Note on 90H (91H)
UP navigate Button 105 00H = released, 7FH = pressed Note on 90H (91H)
DOWN navigate Button 106 00H = released, 7FH = pressed Note on 90H (91H)
Center encoder Push Button 107 00H = released, 7FH = pressed Note on 90H (91H)
CENTER ENCODER Rotary Encoder 52 3FH=CCW, 41H = CW Control change B0H (B1H)
CONTROLLER MODE Button / LED 108 /110 00H = released, 7FH = pressed Note on 90H (91H)
Shift touch button / LED 109 / 111 00H = released, 7FH = pressed Note on 90H
Right Buttons
CUE Right Button / LED 46 / 46 00H = released, 7FH = pressed Note on 90H (91H)
PLAY/PAUSE >|| Right Button / LED 47 / 47 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 1 Right Button / LED 52 / 52 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 2 Right Button / LED 53 / 53 00H = released, 7FH = pressed Note on 90H (91H)
HOT START 3 Right Button / LED 54 / 54 00H = released, 7FH = pressed Note on 90H (91H)
SYNC Right Button / LED 55 / 55 00H = released, 7FH = pressed Note on 90H (91H)
Posted Fri 22 Nov 13 @ 3:55 pm
djdad
Sent u an email. Let me know if that works now.
Posted Fri 22 Nov 13 @ 6:11 pm
djtyme209
djdad wrote :
Sent u an email. Let me know if that works now.
Your are the bomb and a freaking Genius :-) what did u do if its easy to explain? im a pc tech and tinker and like to no why,how,when,where, things get fixed thanx 1,000 tymes. yes,yes,yes its fixed thanx so much as to my gig is tomorrow saturday the 22nd thanx
Posted Fri 22 Nov 13 @ 8:22 pm
djdad
The error most likely was the zero value, which was 0x00 as per the manual, but 0x40 as per your Miditrace results.
LOAD Left Button / LED 101 / 101 00H = released, 7FH = pressed Note on 90H (91H)
LOAD Right Button / LED 102 / 102 00H = released, 7FH = pressed Note on 90H (91H)
Will have the units shortly (from our Warehouse), but those may be pre-production models, so we will let MXR users know if any updated mapper files are needed.
Glad it worked for you.
LOAD Left Button / LED 101 / 101 00H = released, 7FH = pressed Note on 90H (91H)
LOAD Right Button / LED 102 / 102 00H = released, 7FH = pressed Note on 90H (91H)
Will have the units shortly (from our Warehouse), but those may be pre-production models, so we will let MXR users know if any updated mapper files are needed.
Glad it worked for you.
Posted Fri 22 Nov 13 @ 9:24 pm
Djfingas
@DJDAD just wondering if you have a mapping for the 14mxr?
Posted Tue 18 Mar 14 @ 9:20 am
djdad
there is no custom mapping for the 14MXr. Is there an issue with the default one ?
Posted Tue 18 Mar 14 @ 1:35 pm