Hardware Manuals


Pioneer DJ - DDJ-RR - Layout  

REAR PANEL





  1. BOOTH OUTPUT (TRS) Alternative Output for booth monitoring via 1/4" (TRS) cables. This Output is also part of the USB Audio Interface (Channels 5,6)

  2. MASTER OUTPUT (XLR/RCA). Main Output. Connect your amplifier or amplified speakers using common XLR cables or RCA cables. The Level of this Output is controlled from the top panel

  3. INPUTS 1 & 2. Connect your analogue media sources (CD, MP3 players etc). Inputs can be routed directly through the Master Output or through the DJ Application via the USB Audio Interface , depending on the selected Mixer mode. See details at the Inputs Chapter

  4. MIXER MODE. Select the Mixer operation mode. See details at the Inputs Chapter

  5. MIC INPUT. Connect your Microphone using a proper 1/4" cable/adapter The Volume of this Input is controlled from the Front panel. See further details about the Microphone Input in the Inputs Chapter

  6. USB. Connect the DDJ-RR with your computer via a USB port using the provided USB cable

  7. AC PLUG. Connect the provided AC/DC Power adapter.

  8. POWER. Power On/Off Switch. Power on the unit after all connections are done