Hardware Manuals


Numark - 4TRAK  

MIXER CONTROLS






KEY

ACTION

1 CROSSFADER
Blends audio signals from left and right decks
2 VOLUME
Adjust Volume Output of each mixer channel
3 CUE/PFL
Send the audio signal of a Mixer Channel to the Headphones Channel
4 PC/LINE
Define the source of each Mixer Channel. Set to PC to route a VirtualDJ deck to a Mixer channel. Set to LINE to route an analogue source (connected at the rear panel)
5 EQ BASS
Adjust the Equalizer Low Band frequencies (Bass) of each mixer channel
6 EQ MID
Adjust the Equalizer Middle Band frequencies of each mixer channel
7 EQ HIGH
Adjust the Equalizer High Band frequencies (Treble) of each mixer channel
8 GAIN
Adjust the pre-fader Output level (Gain) of each mixer channel



Notes
  • By default the mixer of the 4 TRAK will follow the 3-1-2-4 Mixer Channel order. A different mixer order can be applied either from the Mixer Options menu (right above the Crossfader in the 4 decks default skin) or from VirtualDJ settings (MixerOrder setting in OPTIONS)

  • The 4TRAK is a stand-alone mixer and can operate without any software running on computer
Browser