Hardware Manuals


AKAI - LPD8 MK2  

CONTROLS


By default the device is mapped to offer Effect controls for Left/Right VirtualDJ Decks in Program 1.



1 PROGRAM
Hold down this button and then use one of Pads 5 to 8 to select Program 1 to 4. Only Program 1 is mapped by default (with Effect controls). The other 3 Programs are left unmapped to be customized to your need.
2 NOTE
Selects the NOTE mode. In this mode (default), the device is sending MIDI Note messages, which are used from the default Mapping
3 PROG.CHNG
Selects the Prog Change mode. In this mode the Pads send Program Change messages, which are not assigned by default.
4 CC
Selects the CC mode. In this mode the Pads send CC Midi messages, but cannot be used from VirtualDJ, therefore cannot be mapped.
5 PADS 1-8
If the device is in NOTE mode, use these buttons to trigger the assigned actions as following ...
TOP PAD 1 : Triggers the selected Effect (Slot 1) on the Left Deck.
TOP PAD 2 : Triggers the selected Effect (Slot 2) on the Left Deck.
TOP PAD 3 : Triggers the selected Effect (Slot 3) on the Left Deck.
TOP PAD 4 : Enable/Disable the Color FX (Filter by default) on the Left Deck.
BOTTOM PAD 1 : Triggers the selected Effect (Slot 1) on the Right Deck.
BOTTOM PAD 2 : Triggers the selected Effect (Slot 2) on the Right Deck.
BOTTOM PAD 3 : Triggers the selected Effect (Slot 3) on the Right Deck.
BOTTOM PAD 4 : Enable/Disable the Color FX (Filter by default) on the Right Deck.
6 KNOBS 1-8
If the device is in NOTE mode, use these knobs to control the assigned actions as following ....
TOP KNOB 1 : Adjust the 1st Parameter of the selected Effect (Slot 1) on the Left Deck
TOP KNOB 2 : Adjust the 1st Parameter of the selected Effect (Slot 2) on the Left Deck
TOP KNOB 3 : Adjust the 1st Parameter of the selected Effect (Slot 3) on the Left Deck
TOP KNOB 4 : Adjust the Color FX on the Left Deck
BOTTOM KNOB 1 : Adjust the 1st Parameter of the selected Effect (Slot 1) on the Right Deck
BOTTOM KNOB 2 : Adjust the 1st Parameter of the selected Effect (Slot 2) on the Right Deck
BOTTOM KNOB 3 : Adjust the 1st Parameter of the selected Effect (Slot 3) on the Right Deck
BOTTOM KNOB 4 : Adjust the Color FX on the Right Deck


Advanced Setup