SETUP Note: Device is not supported in Build 6243 or later
Firmware & DriversDrivers :
(Windows only) Install the latest ASIO drivers from http://www.stantondj.com/stanton-controllers-systems/scs1m.html
Drivers are not required for Mac OSX computers.Firmware :
Update the firmware of the unit to the latest version from http://www.stantondj.com/stanton-controllers-systems/scs1m.html
VirtualDJ 8 SetupDownload and install VirtualDJ 8 from http://www.virtualdj.com/download/index.html (in case you have not done already)
Once VirtualDJ 8 is opened, a window will appear to login with your Account credentials.
A Pro Infinity, a Subscriber or a PLUS License is required to use the Stanton SCS1m. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ 8.
The unit offers a pre-defined audio configuration, however an auto-detection is not possible at the moment due to the firewire connection of the unit. In order to apply the pre-defined audio configuration, click on the special STANTON SCS1m button you will see in the AUDIO tab of the Config (Settings) of VirtualDJ.
The unit is now ready
MIDI OperationThe unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.
Find more details at
Audio SetupThe unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. Alternative Audio setups can be applied in the same window (see Advanced Audio Setup).
For further VirtualDJ settings and features please refer to the User Guide of VirtualDJ 8. http://www.virtualdj.com/manuals/virtualdj8/index.html
Advanced Audio Setup
Mixer Channel Order
The Stanton SCS1d is pre-assigned to offer 2 channel mixer orders. By default VirtualDJ will launch at decks 3-1-2-4 (decks 1 and 2 in the middle) and the Stanton SCS1m knobs, faders and buttons will follow this order.
Alternatively a channel order 1-2-3-4 can be used. Click on the Mixer Options button, right above the Crossfader in the 4 decks default GUI of VirtualDJ and select the 1-2-3-4 option. The knobs, faders and buttons of the SCS1m will automatically follow this order.
The option 1-3-4-2 is not pre-defined and it is advised not be selected.
The Stanton SCS1d offers 2 stereo inputs at the rear side and both can be routed and used by VirtualDJ. The Microphone Input
is already included in the pre-defined audio configuration and can be controlled and recorded from VirtualDJ.
The Line Input
can be used to route external audio sources (CD player, turntable etc) though a VirtualDJ deck. In that case an additional line with linein 1 needs to be manually added to the audio configuration (AUDIO tab of Config) as per the following image.
. Audio configuration – Line Input
Once the audio configuration is applied, use the AUX
buttons from the default 2 or 4 decks GUI to route the input to any of the available decks.
The single Line Input of the Stanton SCS1m offers the ability to use a single timecode device
(timecode CD or Timecode Vinyl) as a DVS system.
Connect your CD player or turntable with the Timecode signal and then manually add a timecode line to the audio configuration, as per the following image. Audio configuration – Timecode
Once the audio configuration is applied, enable the timecode control to any of the available decks using the TC buttons from the 2 or 4 decks default GUIs of VirtualDJ.Note. In theory, the Microphone Input can be used as well as a second Timecode Input, however it is not recommended.
Hardware Integration Department 2016 - ATOMIX PRODUCTIONS Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.